QUOTE
1-631-588-3877
RFComp — RF and microwave components

HOME / Circulators  & Isolators / Isolators

RF Isolators

An RF isolator is a two-port, nonreciprocal component that passes power in the forward direction and attenuates power returning toward the source. In a ferrite isolator, reverse power is directed into a termination, so both forward-power handling and reverse-power dissipation matter when selecting protection for an amplifier or signal source.

Compare coaxial, surface-mount, broadband, high-power, stripline and waveguide options in the tabs below. Match the operating band, specified bandwidth, insertion loss, isolation, VSWR, power ratings and mechanical interface to your application. Request confirmation of the exact configuration and current model documentation before ordering.

Use the coaxial, surface-mount, stripline and waveguide groups to compare the interface required by your assembly. The broadband group helps compare wider operating bands; the high-power group separates average and peak power fields. These categories address different selection needs, so check the interface, bandwidth and power conditions of the individual model rather than choosing by family name alone.

Get a Quote
Contact us now
Model No. Frequency Range (GHz) Band Width (MHz) Insertion Loss (dB.Max) Isolation (dB.Min) VSWR (Max) Operating Temperature (℃) Forward Power (W) Reverse Power (W) Size L*W*H (mm) Connector Type
HD32383 0.1~0.16 5 0.3 20 1.2 -10~+70 400 50~250 80*80*31 N Or L29
HD32384 0.088-0.108 20 0.6 18 1.3 0~+60 40 10~20 41*65*20 SMA Or N
HD32385 0.14-0.16 4 0.4 20 1.2 -10~+70 150 10~20 50.5*53*22 SMA Or N
HD32386 0.14-0.16 4 0.4 20 1.2 -10~+70 200 100 50.5*63*22 SMA Or N
HD32387 0.14-0.16 4 0.4 20 1.2 -10~+70 200 200 50.5*75*22 N
HD32388 0.2-0.3 10 0.3 23 1.2 -10~+70 100 10~20 52*57.5*22 SMA Or N
HD32389 0.2-0.3 20 0.3 20 1.2 -10~+70 200 100 52*67.5*22 SMA Or N
HD32390 0.2-0.35 20 0.3 20 1.25 -10~+70 300 150~200 52*79.5*22 N
HD32391 0.14-0.18 4 0.8 50 1.2 -10~+70 200 100 104*57.5*22 SMA Or N
HD32392 0.25-0.3 4 0.4 20 1.2 -10~+70 200 10~20 35*38*20 SMA Or N
HD32393 0.25-0.3 4 0.4 20 1.2 -10~+70 200 100 35*48*20 SMA Or N
HD32394 0.698-0.96 Full 0.4 17 1.35 -30~+70 200 10~20 35*38*20 SMA Or N
HD32395 0.698-0.96 Full 0.4 17 1.35 -30~+70 300 200 35*60*20 N
HD32396 0.3-0.35 10 0.6 40 1.2 -30~+70 200 20~200 70*38*20 SMA Or N
HD32397 0.4-0.7 50 0.3 23 1.2 -30~+70 100 10~20 48*51*24 SMA Or N
HD32398 0.4-0.7 100 0.3 23 1.2 -30~+85 300 100 48*61*24 N
HD32399 0.4-0.7 50 0.3 23 1.2 -30~+85 400 200 48*73*24 N
HD32400 0.6-0.8 20 0.3 23 1.15 -40~+85 150 20 30*33*20 SMA Or N
HD32401 0.6-0.8 20 0.3 23 1.15 -40~+85 150 100 30*43*20 SMA Or N
HD32402 0.6-0.8 20 0.3 23 1.15 -40~+85 200 150~200 30*50.5*20 N
HD32403 0.6-0.8 70 0.3 25 1.2 -40~+85 150 20 30*33*15 SMA
HD32404-A 0.8-2.7 30 0.4 50 1.15 -40~+85 150 20 60*33*20 N
HD32404-B 0.8-2.7 200 0.5 40 1.2 -40~+85 150 20 60*33*20 N
HD32405 0.4-0.6 10 0.3 23 1.2 -10~+70 100 20 28*26*13 SMA
HD32406 0.4-0.6 10 0.6 45 1.2 -10~+70 150 20 53.5*26*13 SMA
HD32407 0.8-3.8 70 0.3 25 1.2 -40~+85 100 10 25.4*28.5*20 SMA Or N
HD32408 1.3-2.4 500 0.4 20 1.25 -40~+85 100 10 34*34*22 SMA Or N
HD32409 0.8-2.7 20 0.5 55 1.15
HD32410 0.8-3.8 70 0.25 25 1.15 -40~+85 150 100 25.4*38.5*20 SMA Or N
HD32411 1.7-3.8 70 0.25 25 1.15 -40~+85 200 150~200 25.4*48.5*20 N
HD32412 1.8-3.5 200 0.3 23 1.2 -30~+70 30 10 25*25*15 SMA
HD32413 1.4-1.7 200 0.3 23 1.2 -30~+70 60 10 21*21*8 SMA
HD32414 0.8-1.0 30 0.3 23 1.2 -30~+70 60 10 20*25.4*15 SMA
HD32415 0.8-1.0 30 0.6 45 1.2 -30~+70 60 10 40*25.4*15 SMA
HD32416 1.7-2.7 30 0.3 25 1.2 -40~+85 60 10~20 19*19*10 SMA
HD32417-A 1.8-3.0 200 0.2 23 1.1 -25~+70 50 10 28*30*19 SMA Or N
HD32417-B 1.8-3.0 400 0.3 23 1.2 -25~+70 50 10 28*30*19 SMA Or N
HD32417-C 1.8-3.0 600 0.4 20 1.25 -25~+70 50 10 28*30*19 SMA Or N
HD32417-D 1.8-3.0 700 0.4 18 1.3 -25~+70 50 10 28*30*19 SMA Or N
HD32418 2.2-6 200 0.3 23 1.2 -30~+70 40 20 22*24*20 SMA Or N
HD32419-A 2.2-3.5 200 0.3 25 1.2 -30~+70 30 10 18*25*14 SMA
HD32419-B 2.2-3.5 400 0.4 20 1.25 -30~+70 30 10 18*25*14 SMA
HD32420 3.0- 5.0 500 0.3 22 1.2 -30~+70 30 10 21*31.8*18.5 SMA Or N
HD32421-A 3.3- 8.0 200 0.2 25 1.2 -40~+75 20 10 16*23*14 SMA
HD32421-B 3.3-8.0 600 0.3 23 1.2 -40~+75 20 10 16*23*14 SMA
HD32421-C 3.3-8.0 1000 0.4 23 1.2 -40~+75 20 10 16*23*14 SMA
HD32422-A 3.4-8.5 300 0.3 25 1.2 -40~+75 20 10 16*26*15 SMA
HD32422-B 3.4-8.5 1000 0.4 23 1.2 -40~+75 20 10 16*26*15 SMA
HD32423 3.5- 8.0 200 0.5 50 1.2 -40~+75 50 20 32*26*15 SMA
HD32424 3.5-8.0 200 0.3 23 1.2 -40~+75 50 20 16*25.5*14 SMA
HD32425 7.0-16.0 500 0.3 25 1.2 -40~+75 10 10 12*20*13 SMA
HD32426 6.5-16 500 0.3 25 1.2 -40~+75 10 10 12*20*13 SMA
HD32426-A 6.5-16 500 0.3 25 1.2 -40~+75 10 10 12*20*13 SMA
HD32426-B 16-20 1000 0.4 20 1.25 -40~+75 10 10 12*20*13 SMA
HD33092-A 0.16~0.25 10 0.3 23 1.2 -10~+70 400 50~250 80*80*31 N Or L29
HD33092-B 0.16~0.25 40 0.4 20 1.25 -10~+70 400 50~250 80*80*31 N Or L29
HD33093 0.136-0.174 38 0.5 20 1.25 0~+60 40 10~20 41*65*20 SMA Or N
HD33094 0.14~0.2 20 0.4 23 1.2 0~+60 40 10~20 41*65*20 SMA Or N
HD33095 0.16-0.2 4 0.3 23 1.2 -10~+70 150 10~20 50.5*53*22 SMA Or N
HD33096 0.2-0.3 20 0.3 20 1.2 -10~+70 150 10~20 50.5*53*22 SMA Or N
HD33097 0.16-0.2 4 0.3 23 1.2 -10~+70 200 100 50.5*63*22 SMA Or N
HD33098 0.2-0.3 20 0.3 20 1.2 -10~+70 200 100 50.5*63*22 SMA Or N
HD33099 0.16-0.2 4 0.3 23 1.2 -10~+70 200 200 50.5*75*22 N
HD33100 0.2-0.3 20 0.3 20 1.2 -10~+70 200 200 50.5*75*22 N
HD33101 0.3-0.4 Full 0.35 18 1.25 -10~+70 100 10~20 52*57.5*22 SMA Or N
HD33102 0.4-0.52 Full 0.25 20 1.25 -30~+70 100 10~20 52*57.5*22 SMA Or N
HD33103 0.4-1.4 100 0.4 20 1.25 -30~+70 100 10~20 52*57.5*22 SMA Or N
HD33104 0.3-0.4 Full 0.35 18 1.25 -30~+70 200 100 52*67.5*22 SMA Or N
HD33105 0.4-0.52 Full 0.3 20 1.25 -30~+70 200 100 52*67.5*22 SMA Or N
HD33106 0.4-1.4 200 0.4 20 1.25 -30~+70 200 100 52*67.5*22 SMA Or N
HD33107 0.35-0.5 20 0.3 25 1.2 -30~+70 300 150~200 52*79.5*22 N
HD33108 0.5-1.4 200 0.4 20 1.25 -30~+70 300 150~200 52*79.5*22 N
HD33109 0.18-0.25 10 0.8 50 1.2 -10~+70 200 100 104*57.5*22 SMA Or N
HD33110 0.25-0.35 20 0.6 50 1.2 -10~+70 200 100 104*57.5*22 SMA Or N
HD33111-A 0.35-0.9 5 0.4 70 1.15 -30~+70 200 100 104*57.5*22 SMA Or N
HD33111-B 0.35-0.9 10 0.5 65 1.2 -30~+70 200 100 104*57.5*22 SMA Or N
HD33111-C 0.35-0.9 20 0.6 50 1.2 -30~+70 200 100 104*57.5*22 SMA Or N
HD33112 0.3-0.4 10 0.3 23 1.2 -30~+70 200 10~20 35*38*20 SMA Or N
HD33116 0.4-0.6 20 0.3 25 1.15 -30~+70 200 10~20 35*38*20 SMA Or N
HD33117 0.3-0.4 10 0.3 23 1.2 -10~+70 200 100 35*48*20 SMA Or N
HD33118 0.4-0.6 20 0.3 25 1.15 -10~+70 200 100 35*48*20 SMA Or N
HD33119 0.47-0.6 Full 0.4 18 1.3 -10~+70 200 100 35*48*20 SMA Or N
HD33120 0.728-0.96 Full 0.35 19 1.25 -30~+70 200 10~20 35*38*20 SMA Or N
HD33121 0.7-1.0 Full 0.6 15 1.45 -30~+70 200 10~20 35*38*20 SMA Or N
HD33122 0.95-1.25 Full 0.4 18 1.3 -40~+85 100 10~20 35*38*20 SMA Or N
HD33123 1.35-1.85 Full 0.5 20 1.25 -40~+85 100 10~20 35*38*20 SMA Or N
HD33124 1.4-2.0 Full 0.4 20 1.25 -40~+85 100 10~20 35*38*20 SMA Or N
HD33125 1.7-2.4 Full 0.35 20 1.22 -40~+85 100 10~20 35*38*20 SMA Or N
HD33126 1.8-2.2 Full 0.35 20 1.2 -40~+85 100 10~20 35*38*20 SMA Or N
HD33127 2.3-2.7 Full 0.35 20 1.2 -40~+85 100 10~20 35*38*20 SMA Or N
HD33128 0.728-0.96 Full 0.35 19 1.25 -30~+70 300 200 35*60*20 N
HD33129 0.7-1.0 Full 0.6 16 1.45 -30~+70 300 200 35*60*20 N
HD33130 1.8-2.2 Full 0.3 20 1.25 -30~+70 300 200 35*60*20 N
HD33131 2.3-2.7 Full 0.4 20 1.25 -30~+70 300 200 35*60*20 N
HD33132 0.35-0.5 10 0.5 50 1.15 -30~+70 200 20~200 70*38*20 SMA Or N
HD33133-A 0.4-0.6 4 0.6 60 1.15 -30~+70 200 20~200 70*38*20 SMA Or N
HD33133-B 0.4-0.6 20 0.6 50 1.15 -30~+70 200 20~200 70*38*20 SMA Or N
HD33134 0.6-1.2 200 0.8 40 1.25 -30~+70 200 20~200 70*38*20 SMA Or N
HD33135 0.7-0.96 Full 0.45 18 1.3 -30~+70 100 10~20 48*51*24 SMA Or N
HD33136 0.7-1.0 Full 0.5 16 1.4 -30~+70 100 10~20 48*51*24 SMA Or N
HD33137 0.7-0.96 Full 0.45 18 1.3 -30~+85 300 100 48*61*24 N
HD33138 0.7-1.0 Full 0.5 16 1.4 -30~+85 300 100 48*61*24 N
HD33139 0.7-0.96 Full 0.45 18 1.3 -30~+85 400 200 48*73*24 N
HD33140 0.7-1.0 Full 0.5 16 1.4 -30~+85 400 200 48*73*24 N
HD33141-A 0.8-1.4 70 0.25 25 1.15 -40~+85 150 20 30*33*20 SMA Or N
HD33141-B 0.8-1.4 200 0.4 20 1.25 -40~+85 150 20 30*33*20 SMA Or N
HD33142 1.4-2.7 300 0.4 20 1.25 -40~+85 150 20 30*33*20 SMA Or N
HD33143 0.8-1.4 200 0.4 230 1.25 -40~+85 150 20 30*33*20 SMA Or N
HD33144-A 0.8-2.7 70 0.25 25 1.15 -40~+85 150 100 30*43*20 SMA Or N
HD33144-B 0.8-2.7 200 0.4 20 1.25 -40~+85 150 100 30*43*20 SMA Or N
HD33145 0.8-1.4 200 0.4 230 1.25 -40~+85 150 100 30*43*20 SMA Or N
HD33146-A 0.8-2.7 70 0.25 25 1.15 -40~+85 200 150~200 30*50.5*20 N
HD33146-B 0.8-2.7 200 0.4 20 1.25 -40~+85 200 150~200 30*50.5*20 N
HD33147 0.8-1.4 200 0.4 230 1.25 -40~+85 150 20 30*33*15 SMA
HD33148 0.6-1.0 30 0.3 25 1.15 -40~+85 100 20 28*26*13 SMA
HD33149 0.96-1.215 Full 0.4 20 1.25 100 20 28*26*13 SMA
HD33150 1.2-1.8 200 0.3 20 1.25 100 20 28*26*13 SMA
HD33151 0.6-1.0 30 0.6 50 1.15 -40~+85 150 20 53.5*26*13 SMA
HD33152 0.96-1.215 Full 0.7 40 1.25 -40~+85 150 20 53.5*26*13 SMA
HD33153 1.2-1.8 200 0.6 40 1.25 -40~+85 150 20 53.5*26*13 SMA
HD33154 1.0-1.6 200 0.4 20 1.25 -40~+85 100 10 25.4*28.5*20 SMA Or N
HD33155-A 1.6-3.8 400 0.4 20 1.25 -40~+85 100 10 25.4*28.5*20 SMA Or N
HD33155-B 1.6-3.8 500 0.5 18 1.3 -40~+85 100 10 25.4*28.5*20 SMA Or N
HD33156 1.0-2.7 200 0.6 45 1.2
HD33157 1.7-2.7 500 0.8 35 1.3
HD33158 1.0-2.7 200 0.4 20 1.25 -40~+85 150 100 25.4*38.5*20 SMA Or N
HD33159 1.7-2.7 500 0.5 18 1.3 -40~+85 150 100 25.4*38.5*20 SMA Or N
HD33160 3.4-3.6 Full 0.4 20 1.25 -40~+85 150 100 25.4*38.5*20 SMA Or N
HD33161 3.3-3.8 Full 0.4 18 1.3 -40~+85 150 100 25.4*38.5*20 SMA Or N
HD33162 1.7-2.2 Full 0.5 18 1.3 -40~+85 200 150~200 25.4*48.5*20 N
HD33163 1.8-2.2 Full 0.4 20 1.25 -40~+85 200 150~200 25.4*48.5*20 N
HD33164 2.3-2.7 Full 0.4 20 1.25 -40~+85 200 150~200 25.4*48.5*20 N
HD33165 3.4-3.6 Full 0.4 20 1.25 -40~+85 200 150~200 25.4*48.5*20 N
HD33166 3.3-3.8 Full 0.4 18 1.3 -40~+85 200 150~200 25.4*48.5*20 N
HD33167 3.7-4.2 Full 0.4 18 1.3 -40~+85 200 150~200 25.4*48.5*20 N
HD33168 2.0-2.5 Full 0.3 20 1.25 -30~+70 30 10 25*25*15 SMA
HD33169 2.0-2.7 Full 0.3 18 1.3 -30~+70 30 10 25*25*15 SMA
HD33170 1.8-3.0 400 0.4 20 1.25 10 21*21*8 SMA
HD33171 1.0-1.4 70 0.3 23 1.2 -30~+70 60 10 20*25.4*15 SMA
HD33172 1.4-1.8 200 0.3 23 1.2 -30~+70 60 10 20*25.4*15 SMA
HD33173 1.8-4.2 400 0.4 20 1.2 -30~+70 60 10 20*25.4*15 SMA
HD33174 1.0-1.4 70 0.6 50 1.2 -30~+70 60 10 40*25.4*15 SMA
HD33175 1.4-1.8 200 0.6 45 1.2 -30~+70 60 10 40*25.4*15 SMA
HD33176 1.8-4.2 400 0.8 40 1.2 -30~+70 60 10 40*25.4*15 SMA
HD33177-A 2.7~5.0 200 0.3 21 1.2 -40~+85 60 10~20 19*19*10 SMA
HD33177-B 2.7-5.0 400 0.4 20 1.25 -40~+85 60 10~20 19*19*10 SMA
HD33178 2.0-3.0 Full 0.3 19 1.25 -25~+70 50 10 28*30*19 SMA Or N
HD33179 1.8-3.0 Full 0.4 16 1.4 -25~+70 50 10 28*30*19 SMA Or N
HD33180 16-18 1000 0.4 20 1.25 -40~+75 10 10 12*20*13 SMA
HD33181 16-20 1000 0.4 20 1.25 -40~+75 10 10 12*20*13 SMA

Isolators ( surface Mount )

Model No. Frequency Range (GHz) Band Width (MHz) Insertion Loss (dB.Max) Isolation (dB.Min) VSWR (Max) Operating Temperature (℃) Forward Power (W) Reverse Power (W) Size L*W*H (mm) Connector Type
HD32427 0.35-0.45 5 0.4 23 1.2 -10~+70 150 10 ∮25.4*9 SMT
HD32428 0.35-0.45 5 0.4 23 1.2 -10~+70 150 100 25.4*31.7*10 SMT
HD32429 0.8-1.4 25 0.3 23 1.2 -40~+85 60 5 ∮20.4*8 SMT
HD32430 1.2-4.0 5% 0.4 23 1.2 -40~+85 100 100 ∮18*24.4*8 SMT
HD32431 0.8-1.0 25 0.3 23 1.2 -40~+85 60 20 20*20*8.6 SMT
HD32432 0.8-1.0 25 0.3 23 1.2 -40~+85 50 20 19*19*8 SMT
HD32433 1.5-2.7 2% 0.4 20 1.25 -40~+85 20 10 10*10*6 SMT
HD32434 1.3-2.4 20 0.4 23 1.2 -40~+85 50 30 12.7*12.7*7.2 SMT
HD32435 4.2-8.5 10% 0.4 20 1.25 -40~+85 50 30 12.7*12.7*6.4 SMT
HD32436 4.5-8.5 15% 0.4 20 1.25 -40~+85 20 30 ∮12.7*6.5 SMT
HD33276 0.45-0.7 20 0.3 23 1.2 -40~+85 150 10 ∮25.4*9 SMT
HD33277 0.7-2.7 100 0.4 20 1.25 -40~+85 150 10 ∮25.4*9 SMT
HD33278 0.45-0.7 20 0.3 23 1.2 -40~+85 150 100 25.4*31.7*10 SMT
HD33279 0.7-2.7 100 0.3 23 1.2 -40~+85 150 100 25.4*31.7*10 SMT
HD33280 1.4-2.7 60 0.3 23 1.2 -40~+85 60 5 ∮20.4*8 SMT
HD33281 2.7-4.0 300 0.3 20 1.25 -40~+85 60 5 ∮20.4*8 SMT
HD33282 1.0-4.0 100 0.3 23 1.2 -40~+85 60 20 20*20*8.6 SMT
HD33283 1.8-4.0 200 0.3 23 1.2 -40~+85 60 20 20*20*8.6 SMT
HD33284 1.0-4.0 100 0.3 23 1.2 -40~+85 50 20 19*19*8 SMT
HD33285 1.8-4.0 400 0.4 20 1.25 -40~+85 50 20 19*19*8 SMT
HD33286 2.4-3.4 200 0.3 20 1.2 -40~+85 50 30 12.7*12.7*7.2 SMT
HD33287 3.4-4.2 400 0.4 20 1.25 -40~+85 50 30 12.7*12.7*7.2 SMT

Isolators ( broadband )

Model No. Frequency Range (GHz) Band Width (MHz) Insertion Loss (dB.Max) Isolation (dB.Min) VSWR (Max) Operating Temperature (℃) Forward Power (W) Reverse Power (W) Size L*W*H (mm) Connector Type
HD32641 1-2 Full 0.7 15 1.5 0~+60 60 10~50 64*66*26 SMA Or N
HD32642 1.35-2.7 Full 0.6 17 1.35 0~+60 30 20 50.8*49.5*19 SMA
HD32643 2-3 Full 0.4 20 1.25 -10~+60 30 20 28*30*18 SMA Or N
HD32644 2-4 Full 0.6 18 1.4 -30~+70 30 20 32*34*18 SMA Or N
HD32645 2-6 Full 1.1 15 1.5 0~+60 20 10 60*42*19 SMA
HD32646 2-8 Full 1.5 12 1.8 0~+60 20 10 60*42*19 SMA
HD32647 4-6 Full 0.5 18 1.3 -40~+85 10 10 16*23*9 TAB
HD32648 4-8 Full 0.6 18 1.3 -30~+70 10 10 20*32*13 SMA
HD32649 4-8 Full 0.4 18 1.35 -30~+70 20 10 19*19*13 SMA
HD32650 3-6 Full 0.5 18 1.3 -20~+60 20 10 25*25*15 SMA
HD32651 6-12 Full 0.6 16 1.4 -30~+70 10 10 16*26*13 SMA
HD32652 8-12 Full 0.5 20 1.25 -40~+85 10 5 12*20*13 SMA
HD32653 7-13 Full 0.5 17 1.3 -30~+70 10 5 12*20*13 SMA
HD32654 10-18 Full 0.7 17 1.35 -30~+70 10 5 15*23*13 SMA
HD32655 6-18 Full 1.5 10 1.8 -30~+70 10 5 12.7*18.5*8.3 TAB
HD32656 6-18 Full 1.5 12 1.8 -30~+70 10 5 19*27*13 SMA
HD33034 5-10 Full 0.5 16 1.4 -30~+70 20 10 19*19*13 SMA
HD33035 10-15 Full 0.5 20 1.25 -30~+70 10 5 12*20*13 SMA
HD33036 12-18 Full 0.5 20 1.25 -30~+70 10 5 12*20*13 SMA
HD33037 8-18 Full 0.8 16 1.45 -30~+70 10 5 15*23*13 SMA

Isolators ( High Power )

Model No. Frequency Range (GHz) Band Width (MHz) Insertion Loss (dB.Max) Isolation (dB.Min) VSWR (Max) Operating Temperature (℃) Average Power (W.Max) Peak Power (W) Size L*W*H (mm) Connector Type
HD32466 0.1~0.4 20% 0.4 23 1.2 -20~+85 1000`1500 15000 116*149*36 L27 Or L29
HD32467 0.15~1.0 15% 0.4 20 1.25 -20~+85 800~1200 10000 80*120*35 N Or L29
HD32468 0.3~0.6 20% 0.4 20 1.25 -30~+85 600~1000 8000 60*100*35 N Or L29
HD32469 0.3-0.4 Full 0.4 18 1.25 -10~+70 500 4000 52*88*28 N
HD32470 1.5~4.0 40% 0.4 21 1.2 -20~+75 350 3000 54*89*35 N
HD32471-A 2.0~6.0 200 0.3 23 1.2 -20~+75 250 2000 34*37.5*42.4 N
HD32471-B 2.0-6.0 30% 0.4 20 1.25 -20~+75 250 2000 34*37.5*42.4 N
HD32472 2.0-6.0 10% 0.4 20 1.25 -30~+75 100 800 19*25.4*10 TAB
HD32473 4.5-9.0 10% 0.4 20 1.25 -30~+75 50 500 12*20*9 TAB
HD32474 4.5~9.0 10% 0.4 20 1.2 -30~+75 50 500 16*25.5*14 SMA
HD32475 9.0~18.0 10% 0.4 20 1.25 -40~+75 30 300 17*27*8.8 SMA
HD33182 0.617-0.894 Full 0.5 17 1.35 -30~+85 600~1000 8000 60*100*35 N Or L29
HD33183 0.698-0.96 Full 0.4 18 1.3 -30~+85 600~1000 8000 60*100*35 N Or L29
HD33184 1.0~3.0 20% 0.4 20 1.25 -30~+85 600~1000 8000 60*100*35 N Or L29
HD33185 0.4-0.52 Full 0.4 23 1.25 -10~+70 500 4000 52*88*28 N
HD33186 0.6-0.8 Full 0.5 20 1.25 -20~+85 500 4000 52*88*28 N
HD33187 0.698-0.96 Full 0.5 18 1.3 -20~+85 500 4000 52*88*28 N
HD33188 1.0~3.0 15% 0.4 20 1.25 -20~+85 500 4000 52*88*28 N

Isolators ( stripline )

Model No. Frequency Range (GHz) Band Width (MHz) Insertion Loss (dB.Max) Isolation (dB.Min) VSWR (Max) Operating Temperature (℃) Reverse Power(W.Max) Size L*W*H (mm) Connector Type
HD32476 0.13-0.17 4 0.4 23 1.2 -10~+60 20 51*51*15 TAB
HD32477 0.13-0.17 4 0.4 23 1.2 -10~+60 150 51*59*15 TAB
HD32478 0.15-0.2 4 0.3 23 1.2 -10~+60 20 50*52*19 TAB
HD32479 0.15-0.2 4 0.4 20 1.2 -10~+60 100 50*60*19 TAB
HD32480 0.16-0.22 4 0.4 20 1.25 -10~+60 50 45*45*13 TAB
HD32481 0.2-0.3 6 0.4 23 1.2 -10~+60 50 44*45.5*15.6 TAB
HD32482 0.3-0.5 5 0.3 30 1.15 -10~+60 200 42*53.6*13 TAB
HD32483 0.3-0.4 10 0.3 25 1.2 -15~+60 150 38.1*46.8*13 TAB
HD32598 0.3-0.35 10 0.4 20 1.25 -15~+60 20 35*38*13 TAB
HD32599 0.25-0.35 4 0.3 23 1.2 -30~+70 20 35*38*13 TAB
HD32600 0.3-0.35 10 0.5 20 1.25 -15~+60 100~150 35*46*13 TAB
HD32601 0.698-0.96 Full 0.6 16 1.4 -30~+70 250 35*56.5*13 TAB
HD32602 0.4-0.6 20 0.4 23 1.2 -15~+60 20 32*35*12.5 TAB
HD32603 0.4-0.6 10 0.4 23 1.2 -15~+60 20 30*33*12 TAB
HD32604 0.6-0.8 10 0.4 20 1.2 -30~+70 10 20*20*8.6 TAB
HD32605-A 0.8-2.7 25 0.6 50 1.2 -30~+70 10 41*21*8.6 TAB
HD32605-B 0.99-1.13 Full 0.8 40 1.25 -30~+70 10 41*21*8.6 TAB
HD32606 0.6-0.7 10 0.3 23 1.2 -40~+85 100 25.4*31.7*6.8 TAB
HD32607 0.35-0.43 4 0.3 23 1.2 -30~+70 10 25.4*25.4*10 TAB
HD32608 0.35-0.43 4 0.3 25 1.2 -30~+70 100 25.4*31.7*10 TAB
HD32609 0.35-0.4 10 0.7 45 1.2 -10~+70 100 54*32*10 TAB
HD32610 1.565-1.586 Full 0.3 25 1.15 -40~+85 10 14.8*16.5*7.8 TAB
HD32611 1.5-1.8 25 0.4 20 1.25 -40~+85 10 10*10*6 TAB
HD32612 0.8-1.3 30 0.3 23 1.2 -40~+85 10 19*19*8 TAB
HD32613 1.7-2.7 70 0.3 23 1.15 -40~+85 10 19*19*5.6 TAB
HD32614 1.7-2.7 70 0.3 23 1.15 -40~+85 100 19*25.4*5.6 TAB
HD32615 0.8-1.3 30 0.3 23 1.2 -40~+85 100 19*25.4*8 TAB
HD32616-A 1.7-4.0 30 0.3 25 1.2 -40~+85 10 12.7*12.7*7.2 TAB
HD32616-B 1.7-4.0 70 0.4 23 1.2 -40~+85 10 12.7*12.7*7.2 TAB
HD32617-A 2.0-4.0 200 0.3 23 1.2 -30~+70 10 18*25*10 TAB
HD32617-B 2.0-4.0 400 0.4 20 1.25 -30~+70 10 18*25*10 TAB
HD32617-C 2.0-4.0 400 0.4 20 1.25 -30~+70 10 18*25*10 TAB
HD32618 2.2-5.0 100 0.3 23 1.2 -40~+85 10 11.5*13*7.2 TAB
HD32619-A 3.5-7.0 300 0.3 25 1.2 -40~+80 10 16*23*9 TAB
HD32619-B 3.5-7.0 800 0.4 23 1.2 -40~+80 10 16*23*9 TAB
HD32620 3.3-7.0 500 0.3 23 1.2 -40~+80 10 16*23*9.5 TAB
HD32621 3.4-7.0 300 0.5 50 1.2 -40~+80 10 32*26*10.5 TAB
HD32622-A 4.0-7.0 300 0.3 25 1.2 -40~+80 10 14*22*9.5 TAB
HD32622-B 4.0-7.0 600 0.4 23 1.2 -40~+80 10 14*22*9.5 TAB
HD32623 4.0-6.0 200 0.3 23 1.2 -40~+80 10 12.7*12.7*6.4 TAB
HD32624 5.0-7.0 200 0.3 25 1.2 -40~+80 10 10*18*8 TAB
HD32625 5.0-7.0 200 0.5 50 1.2 -40~+80 10 22*18*8 TAB
HD32626-A 4.5-7.0 300 0.3 25 1.2 -40~+80 10 12*20*9.5 TAB
HD32626-B 4.5-7.0 600 0.4 23 1.2 -40~+80 10 12*20*9.5 TAB
HD32627-A 5.0-8.0 300 0.3 25 1.2 -40~+80 10 12*20*7.5 TAB
HD32627-B 5.0-8.0 600 0.4 23 1.2 -40~+80 10 12*20*7.5 TAB
HD32628-A 5.0-8.0 300 0.3 25 1.2 -40~+80 10 12*20*6 TAB
HD32628-B 5.0-8.0 600 0.3 20 1.25 -40~+80 10 12*20*6 TAB
HD32629-A 5.0-8.0 300 0.3 25 1.2 -40~+80 20 12*20*9 TAB
HD32629-B 5.0-8.0 600 0.4 23 1.2 -40~+80 20 12*20*9 TAB
HD32630 3.6-5.5 50 0.3 23 1.2 -40~+80 20 8.8*16.5*6.9 TAB
HD32631 4.5-8.0 300 0.3 25 1.2 -40~+80 10 12.7*19*6 TAB
HD32632-A 7-18 300 0.3 25 1.2 -40~+80 5 12.7*12.7*6.5 TAB
HD32632-B 7-18 2000 0.4 20 1.25 -40~+80 5 12.7*12.7*6.5 TAB
HD32632-C 7-18 1000 0.4 23 1.2 -40~+80 5 12.7*12.7*6.5 TAB
HD32633 5.5-16 300 0.3 25 1.2 -40~+80 5 8.9*15*7.8 TAB
HD32634 7.0-20 500 0.5 50 1.2 -40~+80 5 17.8*15*7.8 TAB
HD32635-A 7.0-20 300 0.3 25 1.2 -40~+80 5 9*16*6.6 TAB
HD32635-B 7.0-20 1000 0.4 23 1.2 -40~+80 5 9*16*6.6 TAB
HD32636-A 8.0-20 300 0.3 23 1.2 -40~+80 5 8.9*13.5*7.8 TAB
HD32636-B 8.0-20 1000 0.4 20 1.2 -40~+80 5 8.9*13.5*7.8 TAB
HD32637 9-22 100 0.3 23 1.2 -40~+80 5 6.5*12.7*6.8 TAB
HD32638 9-22 100 0.6 50 1.2 -40~+80 5 13*12.7*6.8 TAB
HD32639-A 11-22 200 0.3 23 1.2 -40~+80 5 6*12.7*6.8 TAB
HD32639-B 11-22 1000 0.4 20 1.25 -40~+80 5 6*12.7*6.8 TAB
HD32640-A 22-25 500 0.6 18 1.4 -40~+80 5 10*16.2*8.2 TAB
HD32640-B 22-25 1000 0.8 16 1.5 -40~+80 5 10*16.2*8.2 TAB
HD33189 0.17-0.25 10 0.3 25 1.2 -10~+60 20 51*51*15 TAB
HD33190 0.17-0.25 10 0.3 25 1.2 -10~+60 150 51*59*15 TAB
HD33191 0.2-0.35 20 0.4 20 1.25 -10~+60 20 50*52*19 TAB
HD33192 0.35-0.6 70 0.3 20 1.2 -30~+70 20 50*52*19 TAB
HD33193 0.2-0.3 20 0.4 20 1.25 -10~+60 100 50*60*19 TAB
HD33194 0.3-0.6 70 0.3 20 1.2 -30~+70 100 50*60*19 TAB
HD33195 0.22-0.35 20 0.3 23 1.2 -10~+60 50 45*45*13 TAB
HD33196 0.37-0.5 Full 0.4 20 1.25 -30~+70 50 45*45*13 TAB
HD33197 0.47-0.6 Full 0.3 21 1.2 -30~+70 50 45*45*13 TAB
HD33198 0.5-0.8 100 0.3 23 1.2 -30~+70 50 45*45*13 TAB
HD33199 0.3-0.4 20 0.3 23 1.2 -30~+70 50 44*45.5*15.6 TAB
HD33200 0.37-0.5 Full 0.4 20 1.25 -30~+70 50 44*45.5*15.6 TAB
HD33201 0.47-0.6 Full 0.3 21 1.2 -30~+70 50 44*45.5*15.6 TAB
HD33202 0.5-0.8 100 0.3 23 1.2 -30~+70 50 44*45.5*15.6 TAB
HD33203 0.4-0.5 20 0.3 25 1.15 -30~+70 200 42*53.6*13 TAB
HD33204 0.4-0.8 20 0.3 25 1.2 -30~+70 150 38.1*46.8*13 TAB
HD33205 0.6-0.8 100 0.3 23 1.2 -30~+70 150 38.1*46.8*13 TAB
HD33206 0.35-0.5 10 0.3 25 1.15 -30~+70 20 35*38*13 TAB
HD33207 0.4-0.47 Full 0.35 20 1.2 -30~+70 20 35*38*13 TAB
HD33208 0.4-0.6 100 0.4 19 1.25 -30~+70 20 35*38*13 TAB
HD33209-A 0.6-1.2 100 0.3 23 1.2 -30~+70 20 35*38*13 TAB
HD33209-B 0.6-1.2 200 0.4 19 1.25 -30~+70 20 35*38*13 TAB
HD33210 0.35-0.45 10 0.3 25 1.15 -30~+70 20 35*38*13 TAB
HD33211 0.4-0.6 20 0.3 25 1.2 -30~+70 20 35*38*13 TAB
HD33212 0.35-0.5 10 0.3 25 1.15 -30~+70 100~150 35*46*13 TAB
HD33213 0.5-1.0 30 0.3 25 1.15 -30~+70 100~150 35*46*13 TAB
HD33214 0.4-0.47 Full 0.35 20 1.2 -30~+70 100~150 35*46*13 TAB
HD33215 0.4-0.6 100 0.4 19 1.25 -30~+70 100~150 35*46*13 TAB
HD33216-A 0.6-1.2 100 0.3 23 1.2 -30~+70 100~150 35*46*13 TAB
HD33216-B 0.6-1.2 200 0.4 19 1.25 -30~+70 100~150 35*46*13 TAB
HD33217 0.698-0.96 Full 0.6 16 1.4 -30~+70 100~150 35*46*13 TAB
HD33218 0.728-0.96 Full 0.5 18 1.3 -30~+70 100~150 35*46*13 TAB
HD33219 0.7-1.0 Full 0.65 15 1.45 -30~+70 100~150 35*46*13 TAB
HD33220 0.728-0.96 Full 0.5 18 1.3 -30~+70 250 35*56.5*13 TAB
HD33221 0.7-1.0 Full 0.65 15 1.45 -30~+70 250 35*56.5*13 TAB
HD33222 1.0-2.7 200 0.4 20 1.25 -30~+70 250 35*56.5*13 TAB
HD33223 0.8-1.0 70 0.25 25 1.15 -30~+70 20 32*35*12.5 TAB
HD33224-A 0.8-1.4 70 0.25 25 1.15 -30~+70 20 30*33*12 TAB
HD33224-B 0.8-1.4 200 0.4 20 1.25 -30~+70 20 30*33*12 TAB
HD33225-A 0.8-1.2 30 0.3 25 1.2 -30~+70 10 20*20*8.6 TAB
HD33225-B 0.8-1.2 70 0.4 20 1.25 -30~+70 10 20*20*8.6 TAB
HD33226 1.2-2.2 100 0.3 23 1.2 -30~+70 10 20*20*8.6 TAB
HD33227 1.7-2.7 200 0.3 23 1.2 -30~+70 10 20*20*8.6 TAB
HD33228-A 0.7-1.0 25 0.25 25 1.15 -40~+85 100 25.4*31.7*6.8 TAB
HD33228-B 0.7-1.0 100 0.5 20 1.25 -40~+85 100 25.4*31.7*6.8 TAB
HD33229-A 1.7-2.2 70 0.3 23 1.2 -40~+85 100 25.4*31.7*6.8 TAB
HD33229-B 1.7-2.2 200 0.4 21 1.2 -40~+85 100 25.4*31.7*6.8 TAB
HD33229-C 1.7-2.2 400 0.5 20 1.25 -40~+85 100 25.4*31.7*6.8 TAB
HD33230 0.43-0.8 20 0.3 23 1.2 -30~+70 10 25.4*25.4*10 TAB
HD33231 0.8-1.0 30 0.2 25 1.15 -30~+70 10 25.4*25.4*10 TAB
HD33232 1.0-2.7 100 0.3 25 1.2 -40~+85 10 25.4*25.4*10 TAB
HD33233 1.7-2.7 400 0.4 20 1.25 -40~+85 10 25.4*25.4*10 TAB
HD33234 0.43-0.8 20 0.3 25 1.2 -30~+70 100 25.4*31.7*10 TAB
HD33235 0.8-1.0 30 0.2 25 1.15 -30~+70 100 25.4*31.7*10 TAB
HD33236 1.0-2.7 100 0.3 25 1.2 -40~+85 100 25.4*31.7*10 TAB
HD33237 1.7-2.7 400 0.4 20 1.25 -40~+85 100 25.4*31.7*10 TAB
HD33238 0.4-0.6 10 0.6 50 1.2 100 54*32*10 TAB
HD33239 0.6-1.0 30 0.6 50 1.15 -30~+70 100 54*32*10 TAB
HD33240 1.574-1.61 Full 0.3 25 1.15 -40~+85 10 14.8*16.5*7.8 TAB
HD33241 1.6-1.63 Full 0.3 25 1.15 -40~+85 10 14.8*16.5*7.8 TAB
HD33242 2.7-3.8 200 0.3 23 1.2 -40~+85 10 14.8*16.5*7.8 TAB
HD33243 3.1-3.6 Full 0.4 20 1.25 -40~+85 10 14.8*16.5*7.8 TAB
HD33244 3.4-3.8 Full 0.4 20 1.25 -40~+85 10 14.8*16.5*7.8 TAB
HD33245 1.614-1.618 4 0.3 25 1.2 -40~+85 10 10*10*6 TAB
HD33246 1.8-2.8 50 0.3 23 1.2 -40~+85 10 10*10*6 TAB
HD33247 1.3-1.7 100 0.3 23 1.2 -40~+85 10 19*19*8 TAB
HD33248-A 1.7-4.2 30 0.2 25 1.15 -40~+85 10 19*19*8 TAB
HD33248-B 1.7-4.2 100 0.3 23 1.15 -40~+85 10 19*19*8 TAB
HD33249 1.8-2.2 Full 0.4 20 1.25 -40~+85 10 19*19*8 TAB
HD33250 2.3-2.7 Full 0.3 20 1.25 -40~+85 10 19*19*8 TAB
HD33251 3.1-3.6 Full 0.4 20 1.25 -40~+85 10 19*19*8 TAB
HD33252 3.3-3.8 Full 0.4 20 1.25 -40~+85 10 19*19*8 TAB
HD33253 1.3-1.7 100 0.3 23 1.2 -40~+85 100 19*25.4*8 TAB
HD33254-A 1.7-4.2 30 0.2 25 1.15 -40~+85 100 19*25.4*8 TAB
HD33254-B 1.7-4.2 200 0.3 23 1.2 -40~+85 100 19*25.4*8 TAB
HD33255 1.8-2.2 Full 0.4 20 1.25 -40~+85 100 19*25.4*8 TAB
HD33256 2.3-2.7 Full 0.3 20 1.25 -40~+85 100 19*25.4*8 TAB
HD33257 3.1-3.6 Full 0.4 20 1.25 -40~+85 100 19*25.4*8 TAB
HD33258 3.3-3.8 Full 0.4 20 1.25 -40~+85 100 19*25.4*8 TAB
HD33259 2.5-2.7 Full 0.3 21 1.2 -40~+85 10 12.7*12.7*7.2 TAB
HD33260 3.1-3.6 Full 0.4 20 1.25 -40~+85 10 12.7*12.7*7.2 TAB
HD33261 2.7-5.0 300 0.4 20 1.25 -40~+85 10 11.5*13*7.2 TAB
HD33262 5.5-7.0 200 0.3 23 1.2 -40~+80 20 8.8*16.5*6.9 TAB
HD33263 16-20 1000 0.4 20 1.25 -40~+80 5 8.9*15*7.8 TAB

Isolators ( waveguide )

Model No. Frequency Range (GHz) Band Width (MHz) Insertion Loss (dB.Max) Isolation (dB.Min) VSWR (Max) Operating Temperature (℃) Size L*W*H (mm) Connector Type
HD32913 4.0-6.0 300 0.3 23 1.15 -30~+70 90*124.5*63.5 WR187 With sealing groove
HD32914 5.0-7.0 300 0.3 23 1.15 -30~+70 50*100*62 WR159
HD32915-A 5.38-8.2 500 0.3 25 1.2 -30~+70 42*95*49 WR137
HD32915-B 5.38-8.2 1000 0.4 20 1.25 -30~+70 42*95*49 WR137
HD32916 7.25-8.4 Full 0.4 20 1.25 -40~+80 62.2*75.5*48 WR112
HD32917 7.0-10.0 500 0.3 23 1.2 -40~+80 62.2*83.3*44.5 WR112
HD32918 7.0-10.0 1000 0.4 20 1.25 -40~+80 36*75.5*48 WR112
HD32919 8.2-12.5 300 0.3 25 1.2 -40~+80 12.7*48.5*42 WR90
HD32920-A 8.2-12.5 1000 0.3 23 1.2 -40~+80 28*56*42 WR90
HD32920-B 8.2-12.5 2000 0.4 20 1.25 -40~+80 28*56*42 WR90
HD32921 9.9-15 300 0.3 20 1.2 -40~+80 12.7*43*38 WR75
HD32922 13.75-14.5 Full 0.3 20 1.2 -40~+80 12.7*43*38 WR75
HD32923-A 9.9-15 500 0.3 25 1.2 -40~+80 25*52*38 WR75
HD32923-B 9.9-15 1000 0.3 23 1.2 -40~+80 25*52*38 WR75
HD32923-C 9.9-15 2000 0.4 20 1.25 -40~+80 25*52*38 WR75
HD32924-A 10-15 500 0.25 25 1.2 -40~+80 28*52*38 WR75
HD32924-B 10-15 1000 0.3 23 1.2 -40~+80 28*52*38 With sealing groove
HD32925-A 12-18 500 0.3 23 1.2 -40~+80 12.7*38.3*33.3 WR62
HD32925-B 12-18 1000 0.4 20 1.2 -40~+80 12.7*38.3*33.3 WR62
HD32926-A 12-18 1000 0.3 23 1.2 -40~+80 21*52*33.3 WR62
HD32926-B 12-18 2000 0.4 20 1.25 -40~+80 21*52*33.3 WR62
HD32927 14.5-22 1000 0.3 23 1.2 -40~+80 15*40*30.2 WR51
HD32928-A 17.6-26.7 500 0.3 25 1.15 -40~+80 12.7*32*22.4 WR42
HD32928-B 17.6-26.7 1000 0.4 23 1.2 -40~+80 12.7*32*22.4 WR42
HD32929-A 17.6-26.7 1000 0.3 23 1.2 -40~+80 12.7*38.1*22.3 WR42
HD32929-B 17.6-26.7 2000 0.4 20 1.25 -40~+80 12.7*38.1*22.3 WR42
HD32930-A 21.7-33 1000 0.3 23 1.2 -40~+80 15*32*21.1 WR34
HD32930-B 21.7-33 2000 0.4 20 1.25 -40~+80 15*32*21.1 WR34
HD32931-A 21.7-33 1000 0.3 23 1.2 -40~+80 12.7*32*21.1 WR34
HD32931-B 21.7-33 2000 0.4 20 1.25 -40~+80 12.7*32*21.1 WR34
HD32932 26.5-40 1000 0.3 23 1.2 -40~+80 10*28*19.1 WR28

Related products

Low Noise Amplifiers

Circulators

  • Read more

RF Isolator Configuration Requirements

Begin with the source power and the worst expected load mismatch. An isolator reduces the reflected power reaching the source, but it does not remove the mismatch at the load or provide unlimited protection. The termination must dissipate the returning power within its rating and thermal conditions.

Operating Band and Isolation

Specify the center frequency and required bandwidth, minimum isolation, maximum insertion loss and VSWR. A catalog tuning range may be broader than the instantaneous bandwidth of a selected configuration; confirm the operating band with the quotation.

Forward and Reverse Power

Provide average and peak forward power, pulse width, duty cycle and expected reflected power. Reverse-power capacity can differ substantially from forward-power capacity. Include the ambient temperature, cooling and load-mismatch conditions.

Package and Port Interface

Select the required coaxial connector, surface-mount or stripline interface, or waveguide size. Confirm signal-flow direction, mounting dimensions, clearance and thermal contact against the model drawing.

Speak to an Engineer

Choosing the Right RF Isolator

Choose an isolator against the full operating band and worst-case power conditions. Compare specifications at the required temperature and mounting conditions, then validate the assembled signal chain before relying on the device for protection.

  • Frequency and bandwidth: Confirm the tuned center frequency and usable bandwidth. Do not treat every listed frequency range as full-band coverage unless the specification explicitly says so.
  • Isolation: This is reverse-direction attenuation, expressed in dB. More isolation reduces the power reaching the source, but does not increase the termination’s thermal rating.
  • Insertion loss: Forward loss reduces delivered power and contributes heat. Include it in the amplifier output budget and thermal design.
  • VSWR: Check input and output matching over frequency. An isolator does not correct the antenna or load mismatch that produces reflections.
  • Forward and reverse ratings: Evaluate both independently, including pulse conditions and temperature derating. For example, the coaxial comparison lists HD32400 with 150 W forward and 20 W reverse power; those ratings are not interchangeable.
  • Integration: Check port direction, connectors, mounting and cooling. Ask for current drawings and any missing specifications for the selected model.

If you need access to a third RF port instead of an internally terminated reverse path, compare the RF circulator options. Confirm the routing and termination arrangement against the system requirements.

RF Isolator FAQs

What does an RF isolator do?

An RF isolator passes power primarily in one direction and attenuates reverse-travelling power. In a ferrite isolator, an internal termination absorbs the reverse power. It can reduce reflections reaching an amplifier or signal source when used within its specified frequency, forward-power, reverse-power and temperature limits. It does not eliminate the load mismatch itself.

Isolation measures how effectively reverse signals are suppressed, while insertion loss refers to how much signal power is lost in the forward direction. A high-quality isolator provides high isolation with minimal insertion loss.
VSWR (Voltage Standing Wave Ratio) indicates how well the isolator is impedance-matched to the system. A low VSWR reduces signal reflections and ensures efficient power transfer.

Before You Request an Isolator Quote

Define the center frequency, operating bandwidth, insertion-loss allowance, minimum isolation and maximum VSWR.

Electrical Requirements

Band, loss and isolation

State forward and reverse power separately, including peak power, pulse duration, duty cycle and mismatch conditions.

Power Requirements

Thermal load and protection limits

Provide connector or waveguide details, mounting space, temperature range, quantity and requested delivery date.

Integration Requirements

Mechanical fit and documentation

Request RF Isolator Selection Support

Send the isolator model number and quantity, or share your frequency band, isolation target and forward/reverse power requirements. Include the connector, mounting and thermal constraints so the quotation can identify the correct configuration and supporting documentation.

Browse Catalog
Speak to an Engineer

GET A FAST QUOTE

Need pricing or technical guidance? Fill out the form below and our team will get back to you shortly with a customized quote.

GET A FAST QUOTE

Fill out the form below, and we will be in touch shortly with a price

  • 1-631-588-3877
  • sales@rfcomp.com
  • Syosset, NY 11791

Bi-Directional Amplifier

HD Communications Corp.
REQUEST for QUOTE (RFQ) form for Bi-Directional Amplifier

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.